HONDA |
1969-78 Honda CB750 K&F
HEAD Gaskets
BASE Gaskets
Vesrah Complete
Gasket sets |
CB400F 1975-76 |
|
|
#DP H-56-CFM043
Head Gasket
56mm -- CFM-20 -- .043"
$54.34
Please allow 2 to 3 weeks production time on this
special order item.
|
|
CB500/550 1971-78 & CB650 79-82 |
|
BORE SIZE: 60mm
| 61mm | 62mm
| | 63mm |
64mm | Base Gaskets
|
60mm HEAD GASKET
CFM-20
.043" Thick
For 59 to 60mm bore size.
For use with
DP572 Kits
#DP H-60-CFM043
$54.34
|
|
60mm HEAD GASKET
CFM-20
.059" Thick
For 59 to 60mm bore size.
May be used with
DP572 Kits
Will alter compression ratio.
#DP H-60-CFM059
$54.34
|
|
60mm
HEAD GASKET
Multi-Layer Steel (MLS)
.030" Thick
For 59 to 60mm bore size.
May be used with
DP572 Kits,
Will alter compression ration,
please check clearances carefully.
#DP H-60-MLS030
$79.95
|
|
60mm
HEAD GASKET
Multi-Layer Steel (MLS)
.040" Thick
For 59 to 60mm bore size.
For use with
DP572 Kits
#C8825
$79.95
|
|
60mm
HEAD GASKET
Multi-Layer Steel (MLS)
.060" Thick
For 59 to 60mm bore size.
May be used with
DP572 Kits
Will alter compression ratio.
#DP H-60-MLS060
$89.95
|
|
60mm HEAD GASKET
Copper, Dead Soft
.032" Thick
For 59 to 60mm bore size
May be used with
DP572 Kits
Will alter compression ration,
please check clearances carefully.
#DP H-60-COP032
$69.95
|
|
60mm HEAD GASKET
Copper, Dead Soft
.043" Thick
For 59 to 60mm bore size
May be used with
DP572 Kits
#DP H-60-COP043
$69.95
|
|
60mm HEAD GASKET
Copper, Dead Soft
.050" Thick
For 59 to 60mm bore size
May be used with
DP572 Kits
Will alter compression ration
#DP H-60-COP050
$69.95
|
|
CB500 / 550 / 650
continued...
61mm
|
61mm
HEAD GASKET
CFM-20
.043" Thick
61mm bore size
For use with DP592
Kits
#DP H-61-CFM043
$54.34
|
|
61mm
HEAD GASKET
CFM-20
.059" Thick
61mm bore size
May be used with DP592
Kits,
Will alter compression ration
#DP H-61-CFM059
$54.34
|
|
61mm
HEAD GASKET
Multi-Layer Steel (MLS)
.030" Thick
For 61mm bore size
May be used with DP592 Kits ,
Will alter compression ration,
please check clearances carefully.
#DP H-61-MLS030
$79.95
|
|
61mm
HEAD GASKET
Multi-Layer Steel (MLS)
.036" Thick
For 61mm bore size
May be used with DP592 Kits ,
Will alter compression ration,
please check clearances carefully.
#DP H-61-MLS036
$79.95
|
|
61mm
HEAD GASKET
Multi-Layer Steel (MLS)
.040" Thick
For 61mm bore size
For use with DP592
Kits
#C8826
$79.95
|
|
61mm
HEAD GASKET
Multi-Layer Steel (MLS)
.060" Thick
For 61mm bore size
May be used with DP592 Kits
Will alter compression ratio.
#DP H-61-MLS060
$89.95
|
|
61mm HEAD GASKET
Copper, Dead Soft
.032" Thick
For 61mm bore size
May
be used with DP592 Kits
Will alter compression ration,
please check clearances carefully.
#DP H-61-COP032
$69.95
|
|
61mm HEAD GASKET
Copper, Dead Soft
.043" Thick
For 61mm bore size
May
be used with DP592 Kits
#DP H-61-COP043
$69.95
|
|
61mm HEAD GASKET
Copper, Dead Soft
.050" Thick
For 61mm bore size
May
be used with DP592 Kits
Will alter compression ration.
#DP H-61-COP050
$69.95
|
|
|
CB500 / 550 / 650
continued...
62mm
|
62mm HEAD GASKET
CFM-20
.043" Thick
For 62mm bore size
For use with with
DP674 Kits
1979-82 CB650 Honda
#DP H-62-CFM043
$54.34
|
|
62mm
HEAD GASKET
CFM-20
.059" Thick
62mm bore size
May be used with DP592
Kits,
Will alter compression ration
#DP H-62-CFM059
$54.34
|
|
62mm
HEAD GASKET
Multi-Layer Steel (MLS)
.030" Thick
For 62mm bore size
For use with with
DP674 Kits
Will alter compression ration,
please check clearances carefully.
1979-82 CB650 Honda
#DP H-62-MLS030
$79.95
|
|
62mm
HEAD GASKET
Multi-Layer Steel (MLS)
.040" Thick
For 62mm bore size
For use with with
DP674 Kits
1979-82 CB650 Honda
#C8827
$79.95
|
|
62mm
HEAD GASKET
Multi-Layer Steel (MLS)
.050" Thick
For 62mm bore size
For use with with
DP674 Kits
Will alter compression ration.
1979-82 CB650 Honda
#DP H-62-MLS050
$79.95
|
|
62mm HEAD GASKET
Copper, Dead Soft
.032" Thick
For 62mm bore size
May
be used with DP674 Kits
Will alter compression ration,
please check clearances carefully.
1979-82 CB650 Honda
#DP H-62-COP032
$69.95
|
|
62mm HEAD GASKET
Copper, Dead Soft
.043" Thick
For 62mm bore size
May
be used with DP674 Kits
1979-82 CB650 Honda
#DP H-62-COP043
$69.95
|
|
|
CB500 / 550 / 650
continued...
63mm |
63mm
HEAD GASKET
CFM-20
.043" Thick
For 63mm bore size
#DP H-63-CFM043
$54.34
*Other thicknesses are available by special order
|
|
63mm
HEAD GASKET
Multi-Layer Steel (MLS)
.040" Thick
For 63mm bore size
DP H-63-MLS040
$79.95
*Other thicknesses are available by special order
|
|
|
CB500 / 550 / 650
continued...
64mm |
64mm
HEAD GASKET
Multi-Layer Steel (MLS)
.040" Thick
For 64mm bore size
DP H-64-MLS040
$79.95
*Other thicknesses are available by special order
|
|
|
CB500 / 550 / 650
continued...
BASE GASKETS
|
.010" THICK
#DP
B-550-RC010 Base Gasket
For stock liners
Rubber Coated Steel (Viton®)
.010" Thick
For use with DP592, 572 and 674 Piston Kits
$44.95
|
|
.020" THICK
#DP
B-550-RC020 Base Gasket
For stock liners
Rubber Coated Steel (Viton®)
.020" Thick
For use with DP592, 572 and 674 Piston Kits
$44.95
|
|
CBR600 |
|
#C8265 Head Gasket
67mm,
MLS, 1991-98
CBR600F2 / F3
$87.73
|
|
#C8706-027 Head Gasket
69mm,
MLS, .027",
.030", 2003-06 CBR600rr
$87.73
|
|
#C8736 Head Gasket
68.5mm,
MLS,
.027", 2007-11 CBR600rr
$83.52
|
|
#C8737 Head Gasket
70mm,
MLS,
.027", 2007-11 CBR600rr
$83.52
|
|
NT650 GT HAWK |
|
#C8461 Head & Base Gasket
set
82mm, Stainless Head Gaskets (2)
Spring Steel .010" Base Gaskets (2)
For 1988-91 NT650 Honda
$85.06
|
|
#C8207 Head Gasket
set
82mm, Stainless Head Gaskets (2)
For 1988-91 NT650 Honda
$54.34
|
|
SOHC CB750 |
|
CB750 F/K 1969-78
Please visit our SOHC section!
-
Head Gaskets
-
Base Gaskets
- Vesrah Complete Gasket Sets
|
|
DOHC CB750 |
|
CB750 F/K/C 1979-82 |
#C8003 HEAD GASKET
65mm --
CFM-20
-- .043" -- 823cc
$54.34
|
|
# DP H-835-CFM043 HEAD GASKET
66mm -
CFM-20 -
.043" - 835cc
For use in our DP835/dohc
Piston Kit
$54.34
|
|
#C8004 HEAD GASKET
70mm --
CFM-20
-- .043" -- 890-955cc
$54.34
|
|
#C8521-RCS BASE GASKET
74mm Rubber Coated Steel
(Viton®) .020"
Stock bore to 985cc (stock liners)
$44.95
|
|
#C8454 FIBER BASE GASKET
.020" Fiber Stock Bore to 985cc
$13.29
|
|
#C8451 COPPER BASE GASKET
.005" Copper Stock Bore to
985cc
*Special order item, please allow 2-4 weeks
$35.38
|
|
#C8452
COPPER BASE GASKET
.010" Copper Stock Bore to 985cc
*Special order item, please allow 2-4 weeks
$33.68
|
|
#C8453
COPPER BASE GASKET
.020" Copper Stock Bore to 985cc
*Special order item, please allow 2-4
weeks
$33.68
|
|
DOHC CB900 |
|
CB900F 1981-82
(see 1100F also) |
#C8005 Head Gasket
68mm --
CFM-20
-- .043" -- 985cc
$54.34
|
|
#C8006 Head Gasket
72mm -- .043" --
CFM-20
$54.34
|
|
#C8224 Head Gasket
72mm -- 1123cc -- Copper -- .043"
$65.64
|
|
#C8224-050 Head Gasket
72mm -- 1123cc -- Copper -- .050"
*Special order item, please allow 2-4 weeks
$65.64
|
|
#C8521-RCS
BASE GASKET
75.8mm/2.99" OD Rubber Coated Steel
(Viton®) .020"
Stock bore to 985cc (stock liners)
$44.95
|
|
DOHC CB1100 |
CB1100F 1983
(see 900F also) |
#C8006 Head Gasket
72mm --
CFM-20
-- 1123cc
$54.34
|
|
#C8224 Head Gasket
72mm -- Copper -- .043" -- 1123cc
$65.64
|
|
#C8224-050 Head Gasket
72mm -- 1123cc -- Copper -- .050"
Available by special order, allow 2-4 weeks
$65.64
|
|
#C8225 Head Gasket
74mm -- Copper -- .043" -- 1186cc
*Special order item, please allow 2-4 weeks
$65.64
|
|
#C8007 Head Gasket
75mm -- Copper -- .020" -- 1219cc
*Special order item, please allow 2-4 weeks
$65.64
|
|
#C8521-RCS BASE GASKET
75.8mm / 2.99" O.D. Rubber Coated Steel
(Viton®) .020"
$44.95
|
|
#C8451
BASE GASKET
73.6mm O.D. -- 2.90" -- .005" -- Copper
*Special order item, please allow 2-4 weeks
$39.95 |
|
#B0302020 - RCS BASE
GASKET (custom)
3.13" / 79.5mm O.D. Rubber Coated
Steel (Viton®) .020"
$39.95
|
|
RC51 / RVT1000r |
#C8765 Head Gasket
102.5mm -- MLS -- set of (2)
$83.52
|
|
KAWASAKI |
GPZ550 1981-85 & KZ550 1980-83 |
#C8009 Head Gasket
61mm --
CFM-20
-- 615cc
$54.34
|
|
KZ, GPz750, ZX750 Turbo |
#C8012
Head Gasket
69mm --
CFM-20
-- 810cc -- .043"
$54.34
|
|
|
ZX-7 / ZX750 1991-95 |
|
#H0540SP4027S HEAD GASKET
72.5mm -- MLS -- .027"
$83.52 |
|
#H0540SP4030S HEAD GASKET
72.5mm -- MLS -- .030"
$83.52 |
|
#H0541030S HEAD GASKET
73mm 791cc
MLS .030"
$83.52
|
|
#C8013 Head Gasket
75mm --
CFM-20
Fits 91-95 ZX750r and 86-87 Ninja 1000
$54.34
|
|
|
KZ900 / Z-1 / 1000 |
#C8152 Head Gasket
70mm -- 1-piece -- Copper -- .043" -- 1015cc
$65.64
|
|
#C8839-040 Head Gasket
71mm 1045cc MLS .040"
$83.52
|
|
#C8315 Head Gasket
71mm -- 2-piece -- Copper -- .043" -- 1045cc
$62.51
|
|
#C8018 Head Gasket
72mm -- 1-piece --
CFM-20
-- 1015 to 1075cc
$54.34
|
|
#C8840-040 Head Gasket
73mm 1105cc MLS
.040"
$83.52
|
|
#C8244 Head Gasket
74mm -- 2-piece -- Copper -- .043" -- 1135cc
$65.64
Available by special order only
|
|
#C8019 Head Gasket
73 to 74mm -- 1-piece --
CFM-20
-- 1075-1135cc
$54.34
available by special order only
|
|
#C8017 Head Gasket
75mm -- 1-piece --
CFM-20
-- 1075-1170cc -- .043"
$51.73
|
|
#C8841-040 Head Gasket
76mm 1197cc MLS
.040"
$83.52
|
|
#C8156 Head Gasket
76mm -- Copper -- 1197cc -- .043"
$65.64
Available by special order, please allow 1 to 3 weeks
|
|
#H0351043C Head Gasket
76mm -- Copper - 1197cc -- .043" -- 2 Piece
$65.64
Available by special order, please allow 1
to 3 weeks
|
|
#C8020 Head Gasket
76mm -- 1-piece --
CFM-20
-- 1170-1200cc
$54.34
|
|
#C8021 Head Gasket
78mm -- 1-piece --
CFM-20
-- 1230-1260cc
$54.34
|
|
#C8093-RCS BASE
GASKET
1000-1200cc Rubber Coated Steel (Viton®)
.020"
3.21" ID 81.53mm
$39.95
|
|
#C8097-RCS BASE
GASKET
1230-1260cc Rubber Coated Steel (Viton®)
.020"
3.285" ID 83.4mm
$44.95
|
|
More head and base gasket sizes available by special order...
email
us with your needs!
|
|
|
|
ZX-9 1994-97 |
#C8272 Head Gasket
75mm -- .030" -- Spring Steel
$87.73
|
|
|
|
ZX900
NINJA / GPZ900R
ZX1000R
1986-87
ZX750r 1991-95
#C8013 Head Gasket
75mm --
CFM-20
-- .043" -- 972cc
$54.34
|
|
|
KZ1000 CSR, P, R
GPZ1100 1984-85 |
#B0269020RC BASE GASKET
Rubber Coated Steel
(Viton®)
.020"
$35.38
|
|
|
KZ1000J 1981-83 & GPz1100 81-85 |
#C8842-040 Head Gasket
71mm -- 1045cc -- MLS --
.040"
$83.52
|
|
#C8324
Head Gasket
72mm --
CFM-20
-- 1075cc -- 2-piece
$51.73
|
|
#C8843-040 Head Gasket
73mm -- 1105cc -- MLS --
.040"
$83.52
|
|
#C8325
Head Gasket
74mm --
CFM-20
-- 1135cc --
2-piece
Available by special order, please allow 2
to 4 weeks
$54.34
|
|
#C8326 Head Gasket
76mm -- 2 piece --
CFM-20
- 1197cc
Available by special order, please allow 2
to 4 weeks
$54.34
|
|
#C8844-040
Head Gasket
76mm -- 1197cc -- MLS --
.040"
$83.52
|
|
#C8845-040 Head Gasket
78mm -- 1230-1260cc -- MLS --
.040"
$83.52
|
|
|
|
ZX11, D1, C 1990-2000
GPZ1100 1995-96 |
|
#C8273 Head Gasket
78mm .030 S/S 1109cc
$79.95
|
|
|
ZRX1200 2001-05
ZZR1200 2001-05
ZR1 2001-05 |
#C8711
Head Gasket
80mm -- MLS/COT -- .027" -- 1194cc
$87.73
|
|
#H2488SP1030S Head Gasket
81mm -- MLS -- .030"
$87.73 |
|
•Provide maximum sealing performance for today's high output
engines and require no sealants
•Ideal for aluminum heads to aluminum blocks and aluminum heads to cast iron
blocks withstanding the shearing force created by the two materials.
•No need to re-torque, the embossing design of the MLS gasket promotes an even
clamp load across the sealing surface allowing for measurable reduced bore
distortion
DP MLS Gaskets are comprised of multiple layers of stainless steel due to
it's increased strength, ability to rebound and resistance to corrosion.
The outer layers of the gaskets are embossed and coated on both sides with Viton
- a flouroelastomer rubber based material that is heat resistant to 250°C
/482ºF. Viton is designed to meet the demands of a variety of harsh sealing
environments, load conditions, and surface finishes.
The center or shim layer is uncoated stainless steel layer which can be varied
to accommodate multiple thickness requirements.
Cometic CFM-20 head gaskets are the perfect
replacement gaskets for your engine. These gaskets are produced from a high
quality perforated steel core that has an elastomer surface. This construction
allows heat to be drawn evenly across the surface, providing maximum sealing
characteristics.
CFM-20 gaskets are fiber laminate over a tanged and galvanized steel core. An
asbestos-free soft material compound containing aramid fibers, inorganic
fillers, and high-grade binder elastomers is applied to both sides of the core.